Are you a university or school looking for an online tutoring partnership ?

1.4. A 2.3 L cylinder containing nitrogen gas at a pressure of 2.8 atm is connected to a 5.5 L ...

r containing nitrogen at 17.3 atm. What is the final pressure when both the cylinders have achieved equilibrium (reached the same pressure)?
6. An analytical procedure requires a solution of chloride ions. How many grams of BaCl2 must be dissolved to make 360 ml of 0.2 M Cl– ?
(M BaCl2 = 208 g/mol)
7. Find the concentration of chloride ions when 344.4 mL of 2.4 M NaCl is mixed with 364 mL of 2.9 M KCl?
8. A sample of an unknown gas had a density of 1.45 g/L at 20.5 °C and 1.2 atm. Calculate the molar mass of the gas.
(R = 0.08206 L·atm·mol-1·K-1)

View More
2.I am trying to figure out how to use the equation of a rainbow so I can make one with ...

istance of where I’m trying to make the rainbow from start to end is 126 blocks and I have no clue how to calculate this but if you could help me out I’d really appreciate it!

View More
3.A force of 40.0 N is needed to compress a spring 0.200 m. A 1.00 x 10-2 kg ball ...

ring.
a) Calculate the work done to compress the spring. (2 marks)
b) What happens to the work done on the spring ? (1 mark)
c) If the spring is released, what happens to the energy of the spring? (1 mark)
d) Calculate the total mechanical energy of the ball at the instant it leaves the spring. (2 marks)
e) What will be the speed of the ball at the instant it leaves the spring? (2 marks)
f) If the ball is fired up into the air by the spring, how much gravitational potential energy will it gain? (1 mark)
g) What will be the maximum height of the ball? (2 marks

View More
nt to construct a replica of the platter for a display. How could they
use coordinates to calculate the diameter of the platter?

View More
They want to construct a replica of the platter for a display. How could they
use coordinates to calculate the diameter of the platter?

View More
ith the formulas to calculate these answers. my assignment is due soon would you please help

View More
8.I need to do a household experiment in which I need to calculate the torsion constant of a string. I ...

have a string hanging with a mass at the bottom and I need to take a video from under the setup and track the angle of twist using tracking software. How would I go about actually calculating the torsional constant.

View More
lculate surface area.
(b) Calculate total capacitance presented by the cell membrane.
(c) cell membrane has a resistance of 10 MΩ. Calculate τ
(d) interior of the cell has an initial potential of Vi = 0 V, a potential of Vo = 100V is applied to the outside of the cell. Calculate how long it takes for the potential inside the cell to reach 50 V.

View More
data with me, I just want to know how to plug it in.

View More
12.I need help trying to figure out my lab results and figure out how to calculate the rate of reaction

13.(a) A 20.0 L container at 303 K holds a mixture of two gases with a total pressure of 5.00 ...

here are 2.00 mol of Gas A in the mixture, how many moles of Gas B are present? (R = 0.0821 L • atm/(K • mol))
(b) The gas in a 250. mL piston experiences a change in pressure from 1.00 atm to 2.80 atm. What is the new volume (in mL) assuming the moles of gas and temperature are held constant?
(c) Small quantities of Oxygen can be produced by the decomposition of mercury(II) oxide as shown below. Typically, the oxygen gas is bubbled through water for collection and becomes saturated with water vapor. Atomic weight of HgO = 216.6 amu, Atomic weight of Oxygen = 32.00 amu)
2 HgO(s) → 2 Hg(ℓ) + O₂(g)
(i) Assuming that 3.05 grams of HgO was used in this reaction, determine the number of moles of oxygen gas formed.(According to the above chemical equation)
(ii) Assuming 310. 0 mL of Oxygen gas was collected at at 29°C, calculate the pressure of the Oxygen gas that was collected. (R = 0.0821 L • atm/(K • mol)
(iii) If the vapor pressure of water at this temperature equals to 0.042 atm, calculate the pressure reading of this experiment.

View More
a) A scientific theory must be able to be proven.
b) A scientific theory has been derived from known facts and always applies.
c) A scientific method should give different results depending on who performs the method.
d) Knowledge of our surroundings usually emerges through an interplay between theory and experiment.
2) The sides of a straight block are measured to 3,202 cm; 0.0012 cm and 11.2 cm, respectively. Calculate the volume of the straightening block and enter it with the correct number of value digits.
(2/0/0)
Number of words: 0
3) A 9.2 dm long and evenly thick rod rests on a support. 0.55 dm from one end, a dynamometer is hung so that the rod will hang horizontally. Then the dynamometer shows 4.4 N. How much does the bar weigh?
(1/1/0)
Number of words: 0
4) A bar AB that is homogeneous and evenly thick has a length of 2.70 m and is rotatable about an axis at A. The bar weighs 25 kg and is kept in equilibrium by a force F which has its point of attack in B. is 45 degrees. How big is the force F?
(1/1/0)
Saved!
25 * 9.82 = 245.5 N
Number of words: 6
5) A trolley rolls at a constant speed to the right. On the cart is an upward cannon that suddenly shoots a bullet. The carriage continues to the right with the same speed as before. Where does the bullet end up when it falls? For a detailed reasoning.
(1/1/1)
Number of words: 0
6) A river is 200 m wide. The water in the river flows at a speed of 2.5 m / s. A motorboat steers across the river at its maximum speed, which in stagnant water is 5.0 m / s. The boat is constantly heading perpendicular to the banks of the river. Where does the motorboat land on the other shore?
(2/0/0)
Number of words: 0
7) A ball with a mass of 2.0 hg moves at a constant speed in a circular path. The radius of the track is 1.5 m and it takes the ball 3.0 seconds to move one turn. How big is the centripetal force?
(1/1/0)
Number of words: 0
8) A bullet moves at a constant speed. Can we then safely say that the resultant of the forces acting on the bullet is zero? Motivate and discuss your answer.
(0/1/1)
Number of words: 0
9) A conductor is located between the poles of a permanent magnet. The current in the conductor goes in the direction of the plane of the paper (away from the reader). How is the force acting on the leader directed?
(1/0/0)
a) To the right of the figure
b) To the left in the figure
c) Downwards in the figure
d) Upwards in the figure
10) Protons enter horizontally from the left between two large metal plates at a speed v = 0.80 Mm / s. The plates are connected to a voltage source with the pole voltage U. Between the plates there is a homogeneous magnetic field with a flux density of 38 mT directed perpendicular to the plane of the paper. The distance between the plates is 1.5 cm. They want the protons to continue with unchanged direction and speed between the plates. Which of the plates should be connected to the positive pole of the voltage source and how large should the voltage U be?
(0/2/0)
Number of words: 0
11) The magnetic flux Φ through a 700-speed coil decreases linearly with time according to the diagram below. Calculate the voltage across the coil at time t = 1.0 ms.
12) The current in a coil with an inductance of 35 mH has a growth rate of 6.2 A / s at a given moment. What is the instantaneous value of the ems induced in the coil?

View More
15.Hi there, I am trying to calculate how much we should pay out in salaries v take as profits in order ...

der to maximize a tax deduction.
Here is some detail - https://beenegarter.com/how-to-calculate-qbi-deduction/
The company's profit was 830k. We need to work out what split to take as 'distributed profits' v 'salaries'
"Your deduction is limited to whichever of these options is the least:
20% of your distributed profits (non-wages)
OR
50% of the company’s W-2 wages
Thank you.

View More
16.How far could i see a 2' x 2' x 2' object that is in the air? I was flying ...

and I'm trying to calculate where it could have landed, i do not need help with a homework study. Could you please help me?

View More
units.
Chemical Equation: Write a generic chemical equation for the dehydration of cobalt (II) chloride ∙ x hydrate (include the state symbols of the reactant and two products). [T2]
Mass of Reactants and Products:
a) Calculate the initial mass of the hydrated cobalt (II) chloride. [T1]
b) Calculate the final mass of the anhydrous cobalt (II) chloride remaining in the cruiio8icible. [T1]
c) Calculate the mass of water given off by the sample of hydrated cobalt (II) chloride. [T1]
Moles of Products:
a) Calculate the moles of anhydrous cobalt (II) chloride remaining in the crucible. [T1]
b) Calculate the moles of water released from the hydrate. {T1]
4. Mole Ratio
a) Create an experimental mole ratio between the b) and a). [T1]
5. Formula of Hydrate: State the chemical formula you have determined for this hydrate.
Round the formula to the closest whole number value for x. [T1]
Discussion/Conclusion Questions: [T6]
Based on the chemical formula of the hydrate, calculate the percentage composition (percent by mass) of the hydrated cobalt (II) chloride. Remember to determine the percentage of each element (Co, Cl, H, and O). [T2]
A possible source of systematic error in this experiment is insufficient heating. Suppose that the hydrate was not completely converted to the anhydrous form. Describe how this would affect: the calculated percent by mass of water and the experimental molecular formula (i.e. would x be higher, lower or the same).
Suppose a student spilled some of the hydrated cobalt (II) chloride. Describe how this would affect the calculated percent by mass of water (would it be higher, lower or the same) and the experimental chemical formula of the hydrate. [T2]

View More
19.1.) A pail is used to fill the concrete in a 5000 mm x 3000 mm x 150 mm concrete ...

s
Bedroom. The pail has an exterior diameter of 350 mm and interior 300 mm on the top while 200 mm
exterior diameter x 150 mm interior diameter on its bottom. The pail has a height of 500 mm. Calculate
the capacity of concrete the pail can hold and how many pails of concrete are needed to fill the
concrete slab of the master’s bedroom?
2.) An Infinity pool that has a dimension of 10518 mm x 17880 mm x 1524 mm will be excavated; the
height of the pool is ¼ above ground. If one small truck can hold 100 cu.ft of soil, how many truckloads
of soil will be excavated?

View More
20.. Noah’s bedroom is 15 feet wide and 18 feet long. He wants to put a new ...

f the carpet he picks up at Home Depot costs $2.35/yd2, how much will it cost him to carpet his room?
a) What are the dimensions of the room in yards?
b) Calculate the area of the room.
c) How much will it cost to put new carpet in Noah’s room?

View More
motionless puck as shown on the picture above. The net force that the stick applies on the puck is 150N and the contact lasts for 7.5 ms. The mass of the puck is 166 g.
A) (1 point) Calculate the acceleration of the puck under the influence of the net force.
B) (2 points) Calculate the puck's change in momentum due to the impulse applied by the hockey stick.
C) (1 point) What is the velocity of the puck once it leaves the stick?
Puck travels over rough ice and comes to a stop after 25 m. The force diagram below shows all forces acting on the puck during that travel.
Screen Shot 2020-11-02 at 2.04.05 PM.png
D) (1 point) Calculate the work done on the puck by gravitational force.
E) (1 point) Calculate the work done on the puck by normal force.
F) (2 points) Calculate work done by friction force on the puck.
CNX_UPhysics_09_03_HockeyPuck.jpg
Now stationary, the puck (red) collides with a blue puck of the mass .332 kg moving to the left with velocity of 2.5 m/s. If collision is perfectly elastic calculate:
H) (2 points) Total momentum of blue+red puck system before collision?
I) (1 point) What is the total momentum of blue+red puck system after collision? How do you know?
J) (2 points) What is the velocity of the blue puck after collision?

View More
0.340-m
radius, and is turning at 90.0 rpm, and you press a steel axe
against it with a radial force of 20.0 N. (a) Assuming the
kinetic coefficient of friction between steel and stone is 0.20,
calculate the angular acceleration of the grindstone. (b) How
many turns will the stone make before coming to rest?
Is this doable without Moment of Inertia? If not, can you also teach me moment of inertia as it pertains to this question?

View More
Since he became the president, did President Trump act with the transparency and the integrity
that you expect from a president?” 675 voters responded the poll and 351 responded “YES.”
Assume that 40% of the U.S. population supports Trump.
a. Define a binary random variable, Y, for supporting Trump (Y=1) vs. not (Y=0).
Calculate the population mean (????????) and variance (????????
2
) for supporting Trump.
b. Calculate the sample mean ????̅ and the sample standard deviation of ????̅ (????????̅ ) for the poll.
c. Calculate the standard error of ????̅ and construct a 95% confidence interval from the
poll using ????̅ and its sample standard error.
d. Conduct a two-sided hypothesis test at 5% significance level to determine whether
40% of the U.S. population supports Trump. State the null and the alternative
hypotheses, calculate the test statistics and the associated p-value, and conclude. Is
the Fox News survey reliable? Why? Why Not?
e. Suppose that you wanted to design a survey that had a margin of error of at most 1%.
That is: the difference between the upper bound and the lower bound of the
confidence interval should be a maximum of 2 percentage points. For example, for
????̅ = 0.52 you are aiming for the 95 % CI to be [0.51 0.53].
How large should n be if the survey uses simple random sampling?

View More
25.how do I answer this question? i dont understand what im supposed to and hkw to do it? 1. ABCD is ...

rectangular sheet of paper, AB 15cm and BC 12= so that the fold line goes through the corner A and the corner B ends up in the figure. Calculate the area of the quadrilateral AECD and the triangle ABC. 12cm. The sheet is folded to the side of the CD, see

View More
26.hi, i wanted to know how do they calculate how many grams are in 1 amu, i know they say ...

of carbon has the mass of 12 grams and we know a carbon atom is 12 amu heavy so we can calcualte it, but i don't understand how do they know how much 1 mole of carbon weighs.

View More
total.... Need to define variables and setup necessary equation to answer the question.... How can I do this? I'm having trouble.... Whatever I try never works out right...I thought it was y+(x+9)=81, but that didn't calculate correctly

View More
onal array.
Marks of each students :
CSE115 CSE 173 CSE215
Jamal 80 70 60
Mamunul 57 76 74
Saad 67 98 87
Rana 98 87 90
Mabubur 45 97 34
1. How to create function named myTotalMark which calculate Total Obtained marks of each students, Print Total marks of each students with their name. Note: Create 2D array using marks in this function and pass same array to next function(specificStudent and specificMarks) as a parameter.So you have to call those function from myTotalMark.
2. Now create another function named specificMarks which calculate Total average marks of Three specific subjects according to teachers input(1 to 5).If teacher Enter 1 it will calculate average marks of CSE115 course.Store marks in a Array and print average marks with subject name. void specificMarks(int subject[5][3])
3. Create another function named specificStudent which calculate Three Specific students marks according to teachers input(1 to 10).If teacher Enter 1 it will calculate the total marks of Jamal.Store marks in a Array and print three students mark with their name.Pass this array to Grade function as a parameter. void specificStudent (int student[5][3])
4. Create another funciton named grade which Calculate grade of Three students which were obtained in specificStudent Function.Using this range: void grade(int number[ ] )
100-200 B+
201-300 A-
301-500 A
5. Now create main function and call only myTotalMark function to display output.
please do it in #c program

View More
onal array.
Marks of each students :
CSE115 CSE 173 CSE215
Jamal 80 70 60
Mamunul 57 76 74
Saad 67 98 87
Rana 98 87 90
Mabubur 45 97 34
1. How to create function named myTotalMark which calculate Total Obtained marks of each students, Print Total marks of each students with their name. Note: Create 2D array using marks in this function and pass same array to next function(specificStudent and specificMarks) as a parameter.So you have to call those function from myTotalMark.
2. Now create another function named specificMarks which calculate Total average marks of Three specific subjects according to teachers input(1 to 5).If teacher Enter 1 it will calculate average marks of CSE115 course.Store marks in a Array and print average marks with subject name. void specificMarks(int subject[5][3])
3. Create another function named specificStudent which calculate Three Specific students marks according to teachers input(1 to 10).If teacher Enter 1 it will calculate the total marks of Jamal.Store marks in a Array and print three students mark with their name.Pass this array to Grade function as a parameter. void specificStudent (int student[5][3])
4. Create another funciton named grade which Calculate grade of Three students which were obtained in specificStudent Function.Using this range: void grade(int number[ ] )
100-200 B+
201-300 A-
301-500 A
5. Now create main function and call only myTotalMark function to display output.

View More
m 2
After graduating from AUD, Salman plans to start a book publishing company in the Media City. He did some research and found that the printer will cost Dh 230,000. He estimated that the variable cost per book is Dh 170 and the selling price is Dh 390.
a. How many books must he sell to break even? Also calculate the breakeven in dirham.
b. In addition to the costs given above, if he wants to pay himself a salary of Dh 15,400 per year, what is her breakeven point in units and dirham?
c. In the first three months of his business, he sold 400 books. Suddenly the printer breaks down. He spent Dh 25000 to fix the printer. In addition to 400 books sold, how many more books she should sell to breakeven? Assume that this part of the question is independent, and she does not draw any salary.
Problem 8
A furniture store makes tables and chairs from plywood and glass. The store has 30 units of plywood, 24 units of glass. Each table requires 7 units of plywood three units of glass, whereas each chair requires three units of plywood and two units of glass. The demand for chairs is between 2 and 4. The ratio between the table and chair is at least 1 to 2. A table earns $225 in profit and a chair, $145. The store also wants a minimum profit of $5000. The store wants to determine the number of tables and chairs to make in order to maximize profit. Formulate a linear programming model for this problem

View More
rivals in (0,2] or three arrivals in (4,7].
I don't know how to calculate the solution. Could you please clarify this exercise ?

View More
vertical strut extending from the lower arch to the roadway (as shown in the image). Here the lower arch is 80m above sea level and the upper arch is 49m above the roadway. At the vertices, the lower arch is 118m above sea level and the upper arch is 73m above the roadway.
Find the quadratic equations which describe the parabolas of the lower arch in:
vertex form, y=a(x-h)^2+k;
intercept form, y=a(x-α)(x-β)
general form, y=ax^2+bx+c
The lower arch intersects the roadway 181.5m from the vertex. Calculate how much higher is the upper arch than the lower at the middle of the bridge?
Using technology, determine the total length of all 19 pairs of equally-spaced, vertical struts between the lower arch and the roadway.

View More
ex
sodium chloride : 23.926 is that supposed to be 23 gram per 1kg?
and
magnesium chloride: how many gram per kg? because it is counted as mol

View More
ne is 0.02 times its mass than another and raises its heat 0.33 times the other when the temp changes with the final temp of the other object is 20 degrees Celsius

View More
35.I’m finding the area of the shaded region in this shape but i’m not sure how to calculate and the ...

e homework is due tomorrow. The part I’m stuck on is the half hockey rink looking white space in the center. Please help!

View More
36.There are so many formulas we use in our stats course. I had a tutor explain a problem to me ...

ad the computer software we use explain a different way on how to calculate the answer. I have to find the regression equation. I believe that the equation is y=ax+b, or intercept + slope. Please correct me if I am wrong
My final answer was y= 57.598+0.607

View More
k of 10 cards numbered 1-10. I draw 5 cards (each time i draw i put the card back and shuffle). The numbers were 8, 2, 4, 9, and 4. What is the probability that it will be 4 on the 6th time i draw? I know each card has a 10% chance of being drawn. I also know the probability of a 10% event happening twice is 1%. But wouldnt the odds be lower since i drew 4 a couple trials earlier? How exactly would i calculate that. If there is an online calculator that executes the answer id like to know. Just a college student who craves probability. :)

View More
38.1. Paul wonders what it would be like to own a house of his own within five years. He now rents ...

o-bedroom apartment with a friend. He pays half the $740 monthly rent. A two-bedroom bungalow on his street is for sale with an asking price of $107 900 and has annual property taxes of approximately $2800.
a) a. As a first time homebuyer, Paul would need a 5% downpayment. Calculate this amount.
b) How much would Paul need to save each month to have the down payment saved is 5 years? Is this amount and the time period reasonable? Explain.
c. Use a TVM Solver to determine the monthly mortgage payment for this house, less the down payment. Assume the interest rate is 6% per year and the mortgage is amortized over 25 years.
d) Calculate the monthly payment to the bank for the mortgage plus the monthly portion of the property taxes.
e) e. Bills from the current owners show that electricity averages $180 every two months, natural gas averages $115 per month, and water averages $260 every four months. Calculate the average monthly utility expenses for the house.

View More
le
triangle ABC to which is hypotenuse
CD height is determined by hypotenuse
snippets AD = 9cm and BD = 16cm.

View More
gular
triangle ABC to which is hypotenuse
CD height is determined by hypotenuse
snippets AD = 9cm and BD = 16cm.

View More
43.A spring with stiffness constant 45.0 N m is attached to the side of a 2.20 kg steel block on a ...

el
tabletop. A child attempting to use the spring to pull the block directly horizontally from rest
extends the spring by 30.0 cm
a) Does the block slip? Explicitly state how you know.
b) Calculate the magnitude of the acceleration if the block accelerates or, if it does not, calculate
the magnitude of the static frictional force acting on the block.

View More
oduce the product only if the average response to a 5-point scale question (where 5 = Strongly Prefer) is better than 4.0. Please set up the appropriate hypothesis test and do the first three steps (use an á value of 0.05). Then, use these data: Sixty-four people answer the question. You calculate the average response to be 4.5 on a 5-point scale, and the standard deviation (Sx) is 2.
How will you state the Null and Alternate Hypotheses [2 points]?

View More
45.Raymond has a credit card with a 21.99% APR. His balance this month is $3,000. Calculate how much ...

interest he will pay this month. Round to the nearest cent.

View More
ow. I'm not sure how to calculate this.
Prepare five 25mL solutions of acidified potassium dichromate from a stock solution of 0.010M K2Cr2O7in 2.0 M H2SO4 with the concentrations
0.0008 M,
0.0016 M,
0.0024M,
0.0032 M
and 0.0040 M.

View More
er, $4.60 for each microwave oven, and $1.55 for each food blender he assembles. If he produced 54 toasters, 38 microwave ovens, and 75 blenders, what were his total weekly gross earnings (in $)?
Jerry King is a server in a restaurant that pays a salary of $24 per day. He also averages tips of 18% of his total gross food orders. Last week he worked 6 days and had total food orders of $2,963.50. What was his total gross pay for the week (in $)?
Solve the problem using 6.2%, up to $128,400 for Social Security tax and using 1.45%, no wage limit, for Medicare tax.
Calculate the monthly Social Security and Medicare withholdings (in $) for the employee as the payroll manager for a cargo and freight company. (Round your answers to the nearest cent.)
Lee Sutherlin is a self-employed electrical consultant. He estimates his annual net earnings at $35,600. How much Social Security and Medicare must he pay (in $) this year?

View More
, mean and standard deviation. (keep getting incorrect answer)

View More
49.5 (5 points) There is H3PO4 available in stock solution that has an assay of 77% and a density ...

cific gravity) of 1.24. What is the molarity of this solution?
Using this solution how would 1 L of 2N solution be made.
6 (5 points) H3BO3 is needed to neutralize 20 ML of a 2N solution of NaOH. How much of the acid should I put in 40 ML of the water to exactly neutralize this solution?
7 (6 points) Describe how to make the solutions below :
20% w/v Salt in water.
20% v/v alcohol in water
20% w/w NaCl in water.
8 (three points) I have 0.6 g/dl solution of NaOH. What is M? Whan is N?
9 (six points) There are 3000mL of 3M NaOH. How much of the following do I need to neutralize? (watch your M’s and N’s
a) 3M H3PO4
b) 2M H2SO4
c) 1M HCL
10 (20 points) The following solutions of NaOH are mixed together 20ML of 3N, 40mL of 2N, 60mL of 1N, 80 mL of 4N, and 100mL of 5N.
a) What is the volume and normality of the final solution?
b) How much 4M sulfuric acid would I need to neutralize?
c) How much stock solution of sulfuric acid with an assay of 77% and a specific gravity of 1.14 would I need?
d) How many grams of HCl would I have to put in a 300mL solution of HCl in water to neutralize?
11 (3 points) How much 5N solution can I make with 98 grams of H3PO4 ?
12 (5 points) How much 5N solution of H3AsO4 can I make with 57 mL of stock solution that is 84% assay and 1.14 specific gravity?
13 (5 points) If we have a 4N solution of HCl that has 0.03645g of HCl in the solution, how many microliters of solution do we have?
14 (10 points) If we have 66mL of a solution of concentrated NaOH that has an assay of 88% and a specific gravity of 1.24, how much 3N H3AsO4 can be neutralized?
15 (ten points) If I have 17 mL of a 20% w/v solution of NaOH and I want to neutralize with H2SO4 that is available in a 4% w/v solution, how much of this solution will be required.
16 (ten points)
a) I have an 12mL of Ba(Cl)2 that is 78% assay that contains 8 grams of Ba(Cl)2. What is the specific gravity?
b) How many Moles of Ba(Cl)2 are there?
c) If I have 80 grams of NaOH in a liter of solution that is of an unknown specific gravity, can I calculate molarity and what is it?
d) What is the difference between molarity and normality?
e) I have 77 ml of 77% salt in water. How much 11% can I make?

View More
e commission if she earns:
1% on the first $200000
3% on the next $250000
5% on the rest.

View More
he
mining ship has a mass of 10,000 kg. The first rocket stage provides a thrust of 80 kN and is used over a
distance of 100,000 km. The second rocket stage provides a thrust of 40 kN and is used over a distance
of 200,000 km. The third rocket stage provides a thrust of 30 kN and is used over a distance of 400,000
km.
1) Calculate the final velocity of the rocket using two methods:
a. Using the work-energy theorem.
b. Using kinematics and Newton’s laws of motion. Hint: You might need to use the
quadratic formula to solve for t:
2) Calculate the total amount of time it takes for the mining ship to reach the other asteroid.
3) If the ship has a reverse thruster that provides 200 kN of thrust, how many km before reaching
the destination should the mining ship engage the reverse thrusters?

View More
at her at speed of 40m/s. She shouts, “Youch!’ because the fast-moving ball hurts her hands. She quickly learns how to move her arms and hands along with the ball as she catches it to reduce the magnitude of the impulse force. If the contact time of the collision is increased from the original value of 3.5ms with no arm or hand movement, to 8.5ms in the manner described, how do the magnitudes of the average impulse forces compare? Calculate both of these average forces.

View More
54.Must know how to use TI 84 Plus CE calculator and be able to teach that skill without wasting time, ...

or give some complimentary/bonus time while you figure it out, or figure out how to do particular things between sessions instead of during the session
Current topics: understand slope and y-intercept and be able to apply it to equations written using different letters instead of m and b or instead of y and x; parallel, perpendicular line equations; calculate slope/gradient of graphs/sides of shapes/equations; calculate midpoint; calculate distance between two points on a graph; find the equation of a line given a graph or given 2 points; learn the meanings of symbols such as R for real numbers, Z for integers' calculate area of a triangle on a graph
The student is in Kazakhstan and speaks Russian and Kazakh fluently, but is intermediate in English. Please speak with her in English as much as possible, but knowing Russian or Kazakh would be a good bonus that would make you preferable to other tutors all else being about the same, though familiarity with TI calculators or the ability to figure them out is also very important.

View More
el has run out.
a) what was the acceleration of the missile before the fuel has run out?
b)Do base on the given graph is it possible to calculate the gravitational acceleration g of the earth?If yes calculate it based on the graph.
c)when the missile get the max height from the moment it launched?
d)what is the max height the missile reached?
e)In how much time the missile will hit the ground from the moment it launched?
f)In what velocity the missile hit the ground (direction and magnitude)?

View More
1.AU MAT 120 Systems of Linear Equations and Inequalities Discussion

mathematicsalgebra Physics