Physics question physics question physics question physics question physics question physics question physics question

ated formula show the picture and box the answer. Also, Don't forget the unit. also, please please show detailed work including very small calculation such as plus and minus. please also clear all the steps so i can use it as example for the similar questions Thank you.

b the link is https://phet.colorado.edu/sims/html/projectile-motion/latest/projectile-motion_en.html and these are the questions 2: Raise the cannon to a height of 15 meters. Set the horizontal velocity to 12 m/sa) Sketch the situationb) Predict the distance you have to place the target from the base of the cannon (calculate this & show all work). c)Perform the experiment by placing the target at the predicted range and clicking the cannon button. Compare your predicted value to the outcome of the testing experiment. Do they agree or disagree? (Did you hit the target?) 3: Raise the cannon to a height of 5 meters. Measure the distance of the David statue from the base of the cannona) Sketch the situation.b) Predict the velocity with which you have to launch the object in order for it to hit the statue (calculate this & show all work).c)Perform the experiment by entering the predicted velocity and clicking Fire. Compare your predicted value to the outcome of the testing experiment. Do they agree or disagree? (Did you hit the statue?) If they disagree, look at your math again! 4: Set the initial velocity of the object to 20 m/s. Place the target at a range (distance) 20 m.a) Sketch the situation.d) Predict the height from which you have to launch the object in order for it to land on the target (calculate this & show all work).b) Perform the experiment by raising the cannon to the predicted height and clicking Fire! Compare your predicted value to the outcome of the testing experiment. Do they agree or disagree? (Did you hit the target?) If they disagree, look at your math again!

inefficiencies, etc), and suggest an improved process. Open and read the Process Improvement (Final Q 1) document which describes the process steps in words and also includes a process map as a visual tool for understanding what's going on in each step. You will need to respond to the following three sub-questions: FINAL Q1: 3 Attachments are the Q1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ I need the 3 part question answered. This is everything in the question.. Understand that there is NOTHING INCOMPLETE, I have added everything that was sent to us. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ a. Of the 9 process steps in the Process Improvement (Final Q 1) document, which specific steps in that process are experiencing lean wastes and/or process cycle time issues (please note, there is more than one step experiencing issues). In your response, name the process step, and/or the transfer interface between steps, and what waste(s) or cycle time issue is involved. Be sure to use standard lean/six sigma terminology that we used in the course when referring to any of the quality concepts; e.g., transportation waste when referring to situations involving a lot of moving around from one place to another. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- b. Which of the process steps you identified in part a do you believe could benefit from process improvement and why? --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- c. What changes would you institute in the process to improve the steps you cited in part b of this question and describe how those changes improves the process. Be specific about which process step(s) your improving and thoroughly describe the improvement to that step. [Note: This question ties to what you decided was important in part b question above.] Also, when answering how you would improve a given process step, assume you have an unlimited budget and personnel resources and you can do mostly anything you want as long as it doesn't violate the laws of physics or the judicial system. Be cautious though because process improvement is designed to save time, money, and resources in doing the needed work.For example, automation is good, and also potentially expensive, so is it worth it for the improvement? - you will have to be the judge of that.

A. The answer is 3C/5. I only need help with part B. Thank you.

n, I completed parts A and B, but can't get C. We get all the answers to the questions but not how to get to the answer. The question is: Patrick changes velocity from 2.0 m/s North to 4.0 m/s South with an acceleration of 0.50 m/s/s South. (A) Determine how much time this process takes (ANSWER: 12 s). (B) Find his displacement (magnitude and direction) (ANSWER: 12 m South). (C) Find how much distance Patrick covered (ANSWER: 20 m). Another question I was having trouble with was this (I got part A but not parts B or C): Two cars are traveling along a straight line in the same direction, the lead car at 25.0 m/s and the other car at 30.0 m/s. At the moment the cars are 40.0 m apart, the lead driver applies the brakes, causing his car to have an acceleration of -2.00 m/s/s. (A) How long does it take for the lead car to stop? (ANSWER: 12.5 s). (B) Assuming that the chasing car brakes at the same time as the lead car, what must be the chasing car's minimum negative acceleration so as not to hit the lead car? (ANSWER: -2.29 m/s/s). (C) How long does it take for the chasing car to stop? (ANSWER: 13.1 s).

can drive (Interpretion of pressure on kinetic theory of gases "P=1/3rhoV^2") On the basis of Calculas if yes then how?